TM 9-2320-280-34
This task covers:
a. Disassembly
c. Inspection
b. Cleaning
d. Assembly
INITIAL SETUP:
Applicable Models
Materials/Parts (Cont'd)
M997A2, M1025A2, M1035A2, M1043A2
Aircraft grease (Appendix B, Item 20)
M1045A2, M1097A2
Bushing grease (Appendix B, Item 22)
Anaerobic pipe sealant (Appendix B, Item 49)
Tools
Manual References
General mechanic's tool kit:
TM 9-2320-280-20
automotive (Appendix G, Item 1)
TM 9-2320-280-24P
Special Tools
Equipment Condition
Hex head driver, 5/32 in. (Appendix G, Item 117)
Winch removed (TM 9-2320-280-20).
Materials/Parts
Maintenance Level
O-ring (Appendix E, Item 125)
Direct support
Three gaskets (Appendix E, Item 13)
Coating compound (Appendix B, Item 11)
Lubricating oil (Appendix B, Item 28)
a. Disassembly
NOTE
Tag leads for assembly.
1.
Remove two screws (2), clamps (1), and leads 6C (3) and 7C (4) from motor end drum support (8) and
gear end drum support (9).
2.
Remove three screws (5) and motor control cover (6) from control (7).
Change 2
