TM 9-2320-280-34
15-4. 9,000 LB. ELECTRIC WINCH REPAIR (Cont'd)
NOTE
In order to perform steps 3 through 9, it may be necessary to remove
plastic coating from winch.
3.
Remove nut (14) and lead 6 (15) from control (16).
4.
Remove capscrew (13) and lead 7 (11) from motor (10).
5.
Disconnect motor connector (18) from control connector (17).
6.
Slide back three rubber boots (19) and remove nuts (21) and control leads (20) from motor (10).
7.
Remove set screw (22) from motor (10).
8.
Loosen two clamps (23) and remove control (16) from motor (10).
9.
Remove clamps (23) from motor (10).
13
11
10
18
14
15
16
17
Change 2
15-17
