TM 9-2320-280-34
15-4. 9,000 LB. ELECTRIC WINCH REPAIR (Cont'd)
21.
Remove detent spacer (23), spring (22), and detent ball (21) from gear housing (17).
22.
Remove clutch lever (20) and O-ring (19) from gear housing (17). Discard O-ring (19).
23.
Remove two retaining rings (27) from gear housing (17).
NOTE
Intermediate ring gear will come out with 85-87 steel balls. Be careful
to catch all 85-87 steel balls.
24.
Remove intermediate ring gear (26) and 85-87 steel balls (28) from gear housing (17).
25.
Remove input sun gear (25) and input gear carrier (24) from gear housing (17).
26.
Remove intermediate gear carrier (29), output gear carrier (30), and output ring gear (16) from gear
end drum support (4).
27.
Remove gasket (31) from gear end drum support (4). Discard gasket (31).
b. Cleaning
CAUTION
Do not clean brake assembly or damage to equipment may result.
Clean all winch components in accordance with para. 2-13.
Change 2
15-19
