TM 9-2320-289-34
5-19.
TRANSMISSION INTERMEDIATE CLUTCH, CENTER SUPPORT ASSEMBLY
AND GEAR UNIT, AND REAR BAND MAINTENANCE (Con’t).
15.
Install output shaft (13) into output
carrier (22) and install snapring (38).
16.
17.
Remove output carrier (22) and gear
unit assembly from vise.
Invert
assembly and place in a soft-jawed
vise with mainshaft (12) pointing
upward.
Lightly coat tab side of thrust washer
(37) ‘with petrolatum. Install thrust
washer in output carrier (22) with tabs
in tab pockets.
NOTE
When a new output carrier (22)
and/or reaction carrier (21) is
installed, a replacement front
internal gear ring (32) must be
used if factory-installed front
internal
gear
ring
prevents
assembly of carriers.
18.
Install front internal gear ring (32)
over output carrier (22).
19.
Install sun gear (36) with end having
chamfered 1.D. facing down.
TA50303
5-124
