TM 9-2320-289-34
5-19.
TRANSMISSION INTERMEDIATE CLUTCH, CENTER SUPPORT ASSEMBLY
AND GEAR UNIT, AND REAR BAND MAINTENANCE (Con’t).
3.
If transmission case (5) bushing was
removed, install new bushing with oil
passages facing up. Drive bushing
squarely into bore until bushing is
0.040-0.055 in.
(1 .016-1 .397 mm)
above
selective
washer
surface.
Remove tools and stake bushing in
bushing lubrication grooves.
4,
Install new sun gear shaft (19)
bushings if removed.
TA50299
5-120
