TM 9-2320-289-34
5-19.
TRANSMISSION INTERMEDIATE CLUTCH, CENTER SUPPORT ASSEMBLY
AND GEAR UNIT, AND REAR BAND MAINTENANCE (Con’t).
5.
Apply petrolatum to seal grooves in
intermediate
clutch piston (29).
Lubricate new inner seal (30) and
outer seal (31) with hydraulic fluid,
Install seals with lips facing away from
spring guide.
6.
Place seal protector (54) over center
support assembly (8) hub. Rotate
intermediate clutch piston (29) and
install, ensuring that it fully seats in
center support assembly. Remove
seal protector.
7 .
Install clutch spring guide (28). Install
3 springs (26) as marked.
NOTE
Ensure that spring retainer (27)
does not catch in snapring (25)
groove.
8 .
Compress spring retainer (27) and
install snapring (25),
TA50300
5-121
