TM 9-2320-289-34
5-19.
TRANSMISSION INTERMEDIATE CLUTCH, CENTER SUPPORT ASSEMBLY
AND GEAR UNIT, AND REAR BAND MAINTENANCE (Con’t).
e .
ASSEMBLY
1 .
Install new center support assembly
(8) bushing if removed. Position
center support assembly with oil
delivery sleeve up. Aline bushing slot
with oil delivery hole in center support
assembly bottom land. Drive new
bushing squarely into bore until flush
to 0.010 in. (0,254 mm) below end
of oil delivery sleeve.
2. Install new output shaft (13) bushing,
if removed, by driving it in until tool
bottoms.
TA50298
5-119
