TM 9-2320-289-20
10-36. PERSONNEL HEATER, FUEL FILTER, AND BLOWER REPLACEMENT (M1010)
(Con’t).
7,
From under truck, close shutoff valve
on hose connected to “IN” side of
fuel filter body (2). Disconnect hose.
Remove 2 screws (18), washers
(19),
and fuel filter assembly.
Unscrew casing (22) and remove
filter seal (20) and filter element (21).
Discard filter seal and filter element.
NOTE
Tag
leads
(23
and
29)
for
installation.
8.
Disconnect
ground
lead
(23) .
Disconnect lead (29) from control box
wire assembly (30). Remove 3
screws (25) securing plate (26) to
heater base (4) and remove blower
motor (24) assembly. Remove nut
(28), blower wheel (27), and plate
from blower motor.
TA50032
10-132
