TM 9-2320-289-20
10-36. PERSONNEL HEATER, FUEL FILTER, AND BLOWER REPLACEMENT (M1010)
(Con’t).
4.
5.
6.
Disconnect wiring harness (9) from personnel heater (1). Unscrew 2 clamps (6) and open
completely.
From under truck, remove exhaust
pipe hanger from exhaust pipe (16),
loosen clamp (15), and remove
exhaust pipe from adapter (13).
Raise personnel heater (1) and
remove cotter pin (14) and adapter.
Discard cotter pin.
Remove personnel heater (1) and
exhaust gasket (17) from heater base
(4). Discard exhaust gasket. Remove
and discard seal (12) if damaged.
TA50031
10-131
