TM 9-2320-289-34
4-10.
ENGINE WIRING HARNESS REPLACEMENT (Con’t).
8 .
Connect water temperature connector (46) and 4 left side glow plug connectors (45). Connect
oil pressure sending unit connector (35) located behind glow plug wiring harness (36)
connector. Connect glow plug wiring harness.
9 .
Connect lead to compressor (33), and install clip (34) with new Iockwasher and bolt.
10.
Connect 2 ground wires (30) and engine wiring harness lead to intake manifold stud, and install
nut (29).
11.
Secure engine wiring harness in 2 retainers (1). Remove 7 nuts (27) from connector studs on
upper alternator (31) and lower alternator (32). Connect leads to upper alternator and lower
alternator, and install 2 new starwashers (28), 4 new Iockwashers (26), and 7 nuts (27).
TA50845
4-79
