4-11. GLOW PLUG WIRING HARNESS REPLACEMENT

/.25ton/TM-9-2320-289-34 CUCV Series Trucks at intermediate direct support and general support level Manual
Page Navigation
328

TM 9-2320-289-34 4-11. GLOW PLUG WIRING HARNESS REPLACEMENT. This task covers: a. Removal b. Installation INITIAL SETUP: Equipment Condition l Both battery negative cables disconnected. (See TM 9-2320-289-20) a. REMOVAL NOTE Ensure that all leads are tagged for installation. 1. Remove 2 nuts (2) and disconnect leads (1) from glow plug relay (3). 2. Disconnect glow plug wiring harness (11) from engine temperature sensor (10). TA50848 4 - 8 3

Privacy Statement
Press Release
Contact