TM 9-2320-289-20
Section Il. ILLUSTRATED MANUFACTURING INSTRUCTIONS -
Continued
1.
Fabricate from softwood plywood, 1 in. thick, NSN 5530-00-129-7889.
NOTE
Part Number 14076275 is the opposite part to 14076276, so all dimensions
will be identical.
2.
Cut to dimensions shown for Part Numbers 14076275 and 14076276.
3.
Remove all burrs.
4.
Treat and seal wood per MIL-T-704J, paragraph 3.2.4. Prime with epoxy primer
coating (Item 39, Appendix C), per MlL-STD-193. Finish paint lusterless forest
green (Item 11, Appendix C) on both sides.
Figure D-40. Insulator.
TA49695
D-18
