TM 9-2320-289-20
Section II. ILLUSTRATED MANUFACTURING INSTRUCTIONS -
Continued
1.
Fabricate from metallic tube, 1 in. outside diameter, NSN 4720-00-288-7928.
2.
Cut to dimensions shown and drill holes as indicated for Part Number 14076232.
3.
Cut to 46.50 in. long for Part Number 15599916.
4.
Remove all burrs.
Figure D-34. Support.
1.
Fabricate from steel tubing, ¼ in. outside diameter, stock size 25 ft. long,
NSN 4720-01-161-0138.
2.
Cut to 49.11 in. long for Part Number 15599235.
3.
Use old pipe as a guide and bend steel tubing to same shape.
Figure D-34.1. Transmission Vacuum Modulator Pipe.
TA49691
Change 2
D-13
