TM 9-2320-289-20
Section Il.
ILLUSTRATED MANUFACTURING INSTRUCTIONS -
Continued
1.
Fabricate from softwood plywood, 1 in. thick, NSN 5530-00-129-7889.
2.
Cut to dimensions shown and drill holes as indicated for Part Number 14076201.
3.
Remove all burrs.
4.
Treat and seal wood per MIL-T-704J, paragraph 3.2.4. Prime with epoxy primer
coating (Item 39, Appendix C), per MIL-STD-193. Finish paint lusterless forest
green (Item 11, Appendix C) on both sides.
Figure D-35. Rear Door Panel.
1.
Fabricate from rubber hose, 7/32 in.
inside diameter, stock size 25 ft. long,
NSN 4720-01-192-3519.
2.
Cut to 1.30 in. long for Part Number 326560.
Figure D-35.1. Transmission Vacuum Modulator Hose.
TA49692
D-14
Change 2
