Section Il. ILLUSTRATED MANUFACTURING
1.
2.
3.
4.
1.
2.
3.
4.
Continued
Fabricate from softwood plywood, ½ in. thick,
NOTE
TM 9-2320-289-20
INSTRUCTIONS -
NSN 5530-00-129-7777.
Except where noted, 14076277 is the opposite part to 14076278, so all
dimensions will be identical.
Using Figure FO-4, cut to dimensions shown for Part Numbers 14076277 and
14076278.
Remove all burrs.
Treat and seal wood per MIL-T-704J, paragraph 3.2.4. Prime with epoxy primer
coating (Item 39, Appendix C), per MlL-STD-193. Finish paint lusterless forest
green (Item 11, Appendix C) on both
Figure D-41.
sides.
Insulator.
Fabricate from softwood plywood, ½ in. thick, NSN 5530-00-129-7777.
NOTE
Part Number 14076279 is the opposite part to 14076280, so all dimensions
will be identical.
Using Figure FO-5, cut to dimensions shown for Part Numbers 14076279 and
14076280.
Remove all burrs.
Treat and seal wood per MIL-T-704J, paragraph 3.2.4. Prime with epoxy primer
coating (Item 39, Appendix C), per MlL-STD-193. Finish paint lusterless forest
green (Item 11, Appendix C) on both sides.
Figure D-42. Insulator.
D-19
