TM 9-2320-289-20
II. ILLUSTRATED MANUFACTURING
Continued
INSTRUCTIONS -
1.
2.
3.
4.
Fabricate from softwood plywood, 1 in. thick, NSN 5530-00-129-7889.
Cut to dimensions shown and drill holes as indicated for Part Number 14063346.
Remove all burrs.
Treat and seal wood per MIL-T-704J,
coating (Item
green (Item 11,
paragraph 3.2,4. Prime with epoxy primer
39, Appendix C), per MlL-STD-193. Finish paint lusterless forest
Appendix C) on both sides.
Figure D-47. Panel Insulator.
TA49697
D-22