TM 9-2320-289-20
Section Il. ILLUSTRATED MANUFACTURING INSTRUCTIONS -
Continued
1.
Fabricate from softwood plywood, 1 in. thick, NSN 5530-00-129-7889.
2.
Cut to dimensions shown and drill holes as indicated for Part Number 14076229.
3.
Remove all burrs.
4.
Treat and seal wood per MIL-T-704J, paragraph 3.2.4. Prime with epoxy primer
coating (Item 39, Appendix C), per MlL-STD-193. Finish paint lusterless forest
green (Item 11, Appendix C) on both sides.
Figure D-36. Insulator.
TA49693
D-15
