Section II. ILLUSTRATED MANUFACTURING
4.
1.
2.
3.
4.
1.
2.
3.
4.
Continued
TM 9-2320-289-20
INSTRUCTIONS -
Treat and seal wood per MIL-T-704J, paragraph 3.2.4. Prime with epoxy primer
coating (Item 39, Appendix C), per MlL-STD-193. Finish paint lusterless forest
green (Item 11, Appendix C) on both sides.
Figure D-37. Insulator.
Fabricate from softwood plywood, 1 in. thick, NSN 5530-00-129-7889.
Using Figure FO-2, cut to dimensions shown and drill holes as indicated for Part
Number 14076272.
Remove all burrs.
Treat and seal wood per MIL-T-704J, paragraph 3.2.4. Prime with epoxy primer
coating (Item 39, Appendix C), per MlL-STD-193. Finish paint lusterless forest
green (Item 11, Appendix C) on both sides.
Figure D-38. Insulator.
Fabricate from softwood plywood, ½ in. thick, NSN 5530-00-129-7777.
NOTE
Part Number 14076273 is the opposite part to 14076274, so all dimensions
will be identical.
Using Figure FO-3, cut to dimensions shown and drill holes as indicated for Part
Numbers 14076273 and 14076274.
Remove all burrs.
Treat and seal wood per MIL-T-704J, paragraph 3.2.4. Prime with epoxy primer
coating (Item 39, Appendix C), per MlL-STD-193. Finish paint lusterless forest
green (Item 11, Appendix C) on both sides.
Figure D-39. Insulator.
D-17
