TM 9-2320-289-20
11-9.
CAB HEATER BLOWER AND HOSES REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Equipment Condition
Materials/Parts
• Cab heater removed. (See paragraph 11-8)
• RTV sealant (Item 41, Appendix C)
a. REMOVAL
NOTE
• If removing hoses (1 or 5), perform step 1.
• If removing blower motor, perform steps 2, 3, and 6 through 8.
• If removing capacitor, perform step 4.
1.
Loosen clamps (2 and 4) and disconnect hoses (1 and 5) from blower motor assembly (3).
TA50063
11-33
