TM 9-2320-289-20
11-8.
CAB HEATER AND DIVERTER REPLACEMENT (Con’t).
3.
Install new seal (14) if removed.
Install diverter (8) to cab heater (2)
with 4 screws (13). Install diverter
switch (12) on diverter with 2 screws
(11).
4.
Position cab heater (2) and diverter
(8) assembly. Ensure there is about 1
in. (2.5 cm) clearance between cab
heater and fender skirt. Connect lead
to diverter switch (12).
5.
Connect
exhaust
pipe
(10)
and
tighten clamp (9) to 75-95 lb.-in.
(9-11 N•m).
TA50061
11-31
