TM 9-2320-289-20
11-8.
CAB HEATER AND DIVERTER REPLACEMENT (Con’t).
2.
Disconnect lead from diverter switch
(12). Remove cab heater (2) and
diverter (8) assembly.
3.
Remove 2 screws (11) and diverter
switch (12). Remove 4 screws (13)
and remove diverter (8) from cab
heater (2). Remove and discard seal
(14) as required.
4.
Remove 3 screws (17) and washers
(16). Remove heater adapter (15).
Clean old sealant from mating
surfaces of cab heater (2) and heater
adapter.
TA50059
11-29
