b. INSTALLATION - TM-9-2320-289-20

11-8. CAB HEATER AND DIVERTER REPLACEMENT (Cont) - TM-9-2320-289-20_659

11-8. CAB HEATER AND DIVERTER REPLACEMENT (Cont) - TM-9-2320-289-20_661

/.25ton/TM-9-2320-289-20 CUCV Series Trucks at Unit level Manual
Page Navigation
639

TM 9-2320-289-20 11-8. CAB HEATER AND DIVERTER REPLACEMENT (Con’t). 5. Remove heater clamp (21) from clamp bracket (20). Remove 2 bolts (19), washers (18), and clamp bracket. Remove 2 nuts (22), Iockwashers (23), bolts (26), and washers (25). Remove heater bracket (24). Discard lockwashers. b. INSTALLATION NOTE If installing cab heater (2), perform steps 2-7. If installing diverter (8), perform steps 3-7. Ensure that heater clamp (21) screws face toward outside of truck. 1. Install heater bracket (24) on fender with 2 washers (25), bolts (26), new lockwashers (23), and nuts (22). Install clamp bracket (20) with 2 washers (18) and bolts (19). Install heater clamp (21) through clamp bracket, Tighten nuts to 15-20 Ib.-ft. (20-27 N•m). Tighten bolts to 75-95 lb.-in, (9-11 N•m). 2. Apply sealant to heater adapter (15). Install heater adapter to cab heater (2) with 3 washers (16) and screws (17). TA50060 11-30

Privacy Statement
Press Release
Contact