TM 9-2320-289-20
11-9.
CAB HEATER BLOWER AND HOSES REPLACEMENT (Con’t).
b.
INSTALLATION
1.
2.
3.
4.
5.
6.
7.
NOTE
• If installing blower motor (19), perform steps 1-3, 5, and 7.
• If installing hoses (1 or 5), perform step 8.
• If installing capacitor (14), perform step 6.
Install fan (18) on blower motor (19) with nut if removed.
Apply sealant to mating surfaces of blower motor (19) and blower motor case (17). Install
blower motor on blower motor case with 5 screws (20).
Install pipe (16) with screw (15). Connect pipe (21) to blower motor (19) and pipe (16).
Position blower motor assembly (3). Install 2 nuts (10) on studs (11). Install 3 screws (12).
Apply sealant to mating surfaces of blower motor assembly (3) and resistor (13). Install
resistor with 2 screws (7).
Connect lead (6) to capacitor (14). Install capacitor to blower motor assembly (3) with screw,
Plug capacitor into blower motor assembly.
Connect lead assembly (8) to resistor (13) and harness plug (9).
TA50065
11-35
