11-8. CAB HEATER AND DIVERTER REPLACEMENT (Cont)

11-8. CAB HEATER AND DIVERTER REPLACEMENT (Cont) - TM-9-2320-289-20_661

11-9. CAB HEATER BLOWER AND HOSES REPLACEMENT

/.25ton/TM-9-2320-289-20 CUCV Series Trucks at Unit level Manual
Page Navigation
641

TM 9-2320-289-20 11-8. CAB HEATER AND DIVERTER REPLACEMENT (Con’t). 6. Rotate heater (2) to aline seal (14) w i t h f r o n t b a t t e r y b o x h o l e , a nd compress seal about 0.5 in. (1.2 cm). When all components are alined, loosely install 2 clamps (3) around cab heater. 7. Connect diverter hose (6) and tighten clamp (7). Connect blower inlet hose (4) and tighten clamp (5). Connect wiring harness assembly (1) to cab heater (2). Tighten clamps (3) securely. Install cab heater cover. FOLLOW-ON TASKS: Connect cab heater fuel lines. (See paragraph 11-7) Install rear battery box and supports, (See paragraph 11-6) Connect cab heater control cable to diverter assembly. (See paragraph 11-4, INSTALLATION, step 4) Check operation of cab heater. (See TM 9-2320-289-10) TA50062 11-32

Privacy Statement
Press Release
Contact