TM 9-2320-289-20
11-9.
CAB HEATER BLOWER AND HOSES REPLACEMENT (Con’t).
2.
Disconnect and remove lead (6) and lead assembly (8) from resistor (13) and harness plug
(9) .
3.
Remove 2 screws (7) and resistor (13). Clean old sealant from resistor and blower motor
assembly (3).
4,
Disconnect lead (6) from capacitor (14), Unplug capacitor from blower motor assembly (3).
Remove screw and capacitor.
5.
Remove 3 screws (12). Remove 2 nuts (10) from studs (11) and remove blower motor
assembly (3).
6.
Disconnect and remove pipe (21) from pipe (16) and blower motor (19). Remove screw (15)
and pipe (16).
7.
Remove 5 screws (20) and blower motor (19) from blower motor case (17), Clean old sealant
from blower motor and blower motor case.
8.
Remove nut holding fan (18) to blower motor (19), and remove fan as required.
TA50064
11-34
