TM 9-2320-280-34
22-9.5. RIGHT REAR FLOOR PANEL REPAIR (Cont'd )
e. Reinforcement Strip Aand Insert Panel Assembly
1.
Position reinforcement strip A (2) on insert panel (1). Align reference line (3) with edge of
reinforcement strip A (2).
2.
Using reinforcement strip A (2) as a template, locate, mark, and drill fourteen 0.187-in. diameter
holes through insert panel (1). Remove reinforcement strip A (2).
3.
Apply approximately 0.125-in. thickness of adhesive sealant to shaded surface of insert panel (1)
and reinforcement strip A (2).
4.
Position reinforcement strip A (2) on insert panel (1) and install with fourteen rivets (4).
5.
Remove any adhesive residue and clean edges of reinforcement strip A (2) and insert panel (1).
Change 1
22-16.81
