TM 9-2320-280-34
22-9.5. RIGHT REAR FLOOR PANEL REPAIR (Cont'd )
g. Metal Strip C and Insert Panel Assembly
1.
Position metal strip C (6) with arrow facing up and toward right on insert panel (1). Align reference
lines (8) and insert panel edges (7).
2.
Using metal strip C (6) as a template, locate, mark, and drill nine 0.187-in. diameter holes through
insert panel (1).
3.
Apply approximately 0.125-in. thickness of adhesive sealant to shaded surface of insert panel (1)
and metal strip C (6).
4.
Position metal strip C (6) on insert panel (1) and install with nine rivets (9).
5.
Remove any adhesive residue and clean edges of metal strip C (6) and insert panel (1).
Change 1
22-16.83
