TM 9-2320-280-34
22-9.5. RIGHT REAR FLOOR PANEL REPAIR (Cont'd )
j. Right Rear Floor Panel and Insert Panel Drilling
1.
Position insert panel (1) on underside of right rear floor panel (2).
NOTE
If vehicle is not equipped with right rear seat support installed,
proceed to step 3.
2.
Using right rear seat support (4) as a template, locate and mark sixteen hole locations (5) on insert
panel (1).
3.
Using insert panel (1) as a template, mark thirty-eight hole locations (3) on underside of right rear
floor panel (2). Remove insert panel (1).
4.
Drill thirty-eight 0.187-in. diameter holes in underside of right rear floor panel (2).
5.
Drill nine 0.187-in. diameter holes through insert panel (1).
22-16.86
Change 1
