TM 9-2320-280-34
22-9.5. RIGHT REAR FLOOR PANEL REPAIR (Cont'd )
d. Right Rear Floor Panel Removal
NOTE
If vehicle is not equipped with right rear seat support installed,
proceed to step 2.
1.
Using a 0.187-in. drill, remove nine rivets (1) from right rear sear support (2) and right rear floor
panel (3).
2.
Position insert panel (4), with arrow facing down and toward front of vehicle, on underside of right
rear floor panel (3) and align mount hole (5) with hole in floor panel (3).
3.
Using insert panel (4) as a template, scribe an outline (6) on right rear floor panel (3).
NOTE
Do not cut through rear seat support when removing right rear
floor panel section.
4.
Using scribed outline marked in step 3 as a guide, cut and remove floor panel (7).
5.
Remove sharp edges and burrs on floor panel (3).
6.
Remove adhesive residue and clean right rear seat support (2),
22-16.78
Change 1
