TM 9-2320-280-34
22-9.5. RIGHT REAR FLOOR PANEL REPAIR (Cont'd )
f. Reinforcement Strip B and Insert Panel Assembly
1.
Position reinforcement strip B (2) on reinforcement strip A (3). Align between reference line (4) and
side edge of reinforcement strip B (2).
2.
Using reinforcement strip B (2) as a template, locate, mark, and drill eighteen 0.187-in. diameter
holes in reinforcement strip A (3) and insert panel (1). Remove reinforcement strip B (2).
3.
Apply approximately 0.125-in. thickness of adhesive sealant to shaded surfaces of reinforcement
strip A (3) and reinforcement strip B (2).
4.
Position reinforcement strip B (2) on reinforcement strip A (3) and install with eighteen rivets (5).
5.
Remove any adhesive residue and clean edges of reinforcement B (2), reinforcement strip A (3), and
insert panel (1).
22-16.82
Change 1
