TM 9-2320-280-34
22-9.5. RIGHT R EAR FLOOR PANEL REPAIR (Cont'd )
i. Metal Strip D and Insert Panel Assembly
1.
Position metal strip D (6), with arrow facing up and right, onto insert panel (2). Align reference lines (4)
and insert panel edges (7).
2.
Using metal strip D (6) as a template, locate, mark, and drill nine 0.187-in. diameter holes through
insert panel (2). Remove metal strip D (6).
3.
Apply approximately 0.125-in. thickness of adhesive sealant to shaded surface of insert panel (2)
and metal strip D (6).
4.
Position metal strip D (6) on insert panel (2) and install with nine rivets (8).
5.
Remove any adhesive residue and clean edges of metal strip D (6) and insert panel (2).
Change 1
22-16.85
