TM 9-2320-280-34
22-9.5. RIGHT REAR FLOOR PANEL REPAIR (Cont'd )
7.
Cut metal strip (5) from sheet metal, and mark center line (6) and directional arrow (10). Identify
metal strip (5) as E.
8.
Place metal strip E (5) on a suitable work surface, with arrow facing up and left.
9.
Locate, mark, and drill fourteen 0.187-in. diameter holes in metal strip E (5).
10.
Cut two metal strips (7) from sheet metal, and mark center line (8), and directional arrow (9).
Identify metal strips (7) as F and G.
11.
Locate, mark, and drill fourteen 0.187-in. diameter holes in metal strip F (7).
12.
Locate, mark, and drill fourteen 0.187-in. diameter holes in metal strip G (7).
Change 1
22-16.77
