TM 9-2320-280-34
22-9.5. RIGHT REAR FLOOR PANEL REPAIR (Cont'd )
c. Metal Strips Fabrication
1.
Cut two metal strips (1) from sheet metal, and mark two reference lines (2), centerline (3), and
directional arrow (4), and identify as metal strips C and D.
2.
Locate, mark, and drill twenty 0.187-in. diameter holes through metal strip C (1).
3.
Bend metal strip C (1) 1.50 in.
4.
Place metal strip D (1), on a suitable work surface, with arrow facing up and to the left.
5.
Locate, mark, and drill twenty 0.187-in. diameter holes through metal strip D (1).
6.
Bend metal strip D (1) 1.50 in.
22-16.76
Change 1
