TM 9-2320-280-34
17-13. TRANSMISSION ASSEMBLY FROM SUBASSEMBLIES (3L80) (Cont'd)
g. Direct Clutch
1.
Remove snapring (1), direct clutch backing plate (2), six composition clutch plates (3), and steel
clutch plates (9) from direct clutch housing (4).
2.
Using intermediate clutch alignment tool, align intermediate clutches (6). Apply air pressure
through center support bolt (10) to hold clutch plates (6) in place. Remove alignment tool and install
direct clutch housing (4) into case (8).
3.
Remove air pressure and ensure that direct clutch housing hub (5) bottoms on sun gear shaft (7).
4.
Install clutch plates (9) and (3) into direct clutch housing (4) starting with a steel clutch plate (9),
then alternating composition clutch plates (3) and steel clutch plates (9).
5.
Install direct clutch backing plate (2) in direct clutch housing (4) with snapring (1).
