TM 9-2320-280-34
17-13. TRANSMISSION ASSEMBLY FROM SUBASSEMBLIES (3L80) (Cont'd)
e. Front Band
Install front band (9) in case (6) and position band anchor hole (8) on band anchor pin (7).
f. Manual Linkage
1.
Install gasket (11) in case (6).
2.
Install manual shaft (12) in case (6).
3.
Install detent lever (15) and jam nut (16) on manual shaft (12). Using 9/16 in. torque adapter,
tighten jam nut (16) to 15-18 lb-ft (20-24 Nm).
4.
Install retaining pin (10) securing manual shaft (12) into case (6).
5.
Install shift lever (13) on manual shaft (12) with nut (14). Tighten nut (14) to 15-25 lb-ft (20-34 Nm).
8
9
7
10
6
13
11
12
14
6
16
15
Change 2
17-51