TM 9-230-280-34
17-13. TRANSMISSION ASSEMBLY FROM SUBASSEMBLIES (3LB80) (Cont' )
d
h. Forward Clutch and Turbine Shaft
1.
Install forward clutch hub thrust washer (13) on forward clutch housing (12). Retain thrust
washer (13) with petrolatum.
NOTE
When installing forward clutch and turbine shaft, it may be
necessary to rotate and shake forward clutch and turbine shaft
assembly to align direct clutch plates with forward clutch housing.
2.
Install forward clutch (12) and turbine shaft (11) into direct clutch (14).
CAUTION
The top of the forward clutch housing must be 1-1/4 in. (31.7 mm)
from oil pump mounting surface or transmission dama e will
g
result.
3.
Measure the distance from top of forward clutch housing (12) to oil pump mounting surface (15) to
determine if forward clutch (12) is fully engaged with direct clutch (14).
17-53
