TM 9-2320-289-34
4-10.
ENGINE WIRING HARNESS REPLACEMENT (Con’t).
NOTE
Ensure that location of Iockwashers (26) and starwashers (28) is noted for
installation.
8 .
Remove 7 nuts (27), 4 Iockwashers (26), and 2 starwashers (28), and disconnect leads from
upper alternator (31) and lower alternator (32). Loosely install nuts (27) on connector studs.
Discard Iockwashers and starwashers. Open 2 retainers (1) and pull engine wiring harness
free.
9 .
Remove nut (29), and disconnect engine wiring harness lead and 2 ground wires (30) from
intake manifold stud.
TA50839
4 - 73
