TM 9-2320-289-34
4-9.1.
REAR FENDER WIRING HARNESS REPLACEMENT (M1028A2) (Con’t).
5.
Remove 2 grommets (3), Unsnap rear fender wiring harness (8) from body and remove.
b.
INSTALLATION
1 .
2 .
3 .
4 .
5 .
6.
Install rear fender wiring harness (8) and snap to body,
Push wiring harness (8) ends through body and install 2 grommets (3).
Connect rear fender wiring harness (8) to rear lamp wiring harness (7).
Connect ground wire (6) with screw (5).
Install 2 shields (10) with 2 bolts (4), washers (2), and nuts (1).
CAUTION
Inner filler panel (11) is made from plastic. Care should be taken when
installing bolts (12), or inner filler panel could crack.
Install inner filler
FOLLOW-ON TASKS:
l Install taillight and
l Install rear fender
4-68.2
Change 1
panel (11) with 14 bolts (12) and 1 nut (13).
lamps. (See TM 9-2320-289-20)
side marker lights. (See TM 9-2320-289-20)
