Section Il. ILLUSTRATED MANUFACTURING INSTRUCTIONS - Continued

Section Il. ILLUSTRATED MANUFACTURING INSTRUCTIONS - Continued - TM-9-2320-289-20_831

Section Il. ILLUSTRATED MANUFACTURING INSTRUCTIONS - Continued - TM-9-2320-289-20_833

/.25ton/TM-9-2320-289-20 CUCV Series Trucks at Unit level Manual
Page Navigation
811

Section Il. ILLUSTRATED MANUFACTURING Continued TM 9-2320-289-20 INSTRUCTIONS- 1 . Fabricate from softwood plywood, 1 in. thick, NSN 5530-00-129-7889. 2. Cut to dimensions shown for Part Numbers 14076871 and 14076872. NOTE Part Number 14076871 is the left half (LH) panel and 14076872 is the right half (RH) panel. Only drill holes indicated for part to be fabricated. 3. Drill holes as indicated. 4. Remove all burrs. 5. Treat and seal wood per MIL-T-704J, paragraph 3.2.4. Prime with epoxy primer coating (Item 39, Appendix C), per MlL-STD-193. Finish paint lusterless forest green (Item 11, Appendix C) on both sides. Figure D-32. Panel Assembly. TA49689 D-11

Privacy Statement
Press Release
Contact