TM 9-2320-289-20
Section Il.
ILLUSTRATED MANUFACTURING INSTRUCTIONS -
Continued
1.
Fabricate from insulator, NSN 2510-01-162-7224.
2.
Cut as required to fit for Part Number 15593599.
Figure D-28. Hood Insulator.
1.
Fabricate from metal strip, NSN 9510-00-516-5737.
2.
Cut to 24.20 in, long for Part Number 14075883.
2.
Cut to 29.62 in. long for Part Number 14075884.
Figure D-29. Retainer.
1.
Fabricate from softwood plywood, 1 in. thick, NSN 5530-00-129-7889.
2.
Using Figure FO-1, cut to dimensions shown and drill holes as indicated for Part
Number 14076209.
3.
Remove all burrs.
4.
Treat and seal wood per MIL-T-704J, paragraph 3.2.4. Prime with epoxy primer
coating (Item 39, Appendix C), per MlL-STD-l 93. Finish paint lusterless forest
green (Item 11, Appendix C) on both sides.
Figure D-30. Rear Door.
1.
Fabricate from Part Number NSN 5330-01-163-5850, 14076235, FSCM 11862.
2.
Using 2 x stock material, cut to 30.60 in. long for Part Number 14076864.
3.
Using 4 x stock material, cut to 56.38 in. long for Part Number 14076212.
Figure D-31. Gasket.
D-10
