11-10. CAB HEATER WIRING HARNESS REPLACEMENT (Cont)

/.25ton/TM-9-2320-289-20 CUCV Series Trucks at Unit level Manual
Page Navigation
649

TM 9-2320-289-20 11-10. CAB HEATER WIRING HARNESS REPLACEMENT (Con’t). NOTE Step 2 only applies to trucks equipped with cargo compartment heater. 2. Connect harness connector (18) to cargo compartment heater connector. 3. Connect wiring harness (1) lead to positive accessory wiring terminal board (16) stud and install new Iockwasher and nut. Install positive accessory wiring terminal board cover and tighten 2 nuts (15). Repeat for negative accessory wiring terminal board (14). 4. Connect wiring harness (1) to cab heater (13) and diverter switch (19). Install new straps on wiring harness as required. 5. Connect wiring harness (1) connectors to wiring harness terminal (11) and fuse panel (12) at “IGN” terminal. TA50070 11-40

Privacy Statement
Press Release
Contact