TM 9-2320-289-20
8-16.
POWER STEERING GEAR REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Equipment Condition
Materials/Parts
• Pitman arm removed. (See paragraph 8-11)
• Two Iockwashers
Tools/Test Equipment
• Torque wrench
1.
Disconnect power
2.
Remove nut (7)
Iockwashers.
steering lines from power steering gear (10).
and Iockwasher (6). Remove nut (8) and Iockwasher (9). Discard
NOTE
It may be necessary to lightly tap on coupling (4) to separate it from
steering shaft flange (5).
3.
Remove 4 bolts (1) and spacers (2) while supporting steering gear (10). Remove steering
gear from frame (3).
TA49739
8-33
