TM 9-2320-289-20
8-15.
POWER STEERING PUMP, BELT, AND PULLEY REPLACEMENT (Con’t).
b. INSTALLATION
1.
2.
3.
4.
5.
• If
installing
• If
installing
NOTE
power steering pump (5), perform steps 2-5.
belt (1), perform steps 6 and 7.
Install bracket (4) on power steering pump (5) with 3 bolts (13).
Install power steering pump pulley (14).
NOTE
On all except M1010, bolt (12) is installed from behind power steering
pump (5).
Position power steering pump (5) and bracket (4) assembly on studs (6) and install with
adjusting bolt (12), adjusting nut (2), and nut (3). DO NOT fully tighten adjusting bolt or nut.
Connect power steering lines at power steering pump (5). (See paragraph 8-14)
Install nut (10) and brace (11) on power steering pump (5). Install bracket (9) with bolt (8) and
adjusting bolt (7). DO NOT fully tighten adjusting bolt.
TA49737
8-31
