TM 9-2320-289-20
8-14.
POWER STEERING LINES REPLACEMENT (Con’t).
NOTE
Perform the following steps as required to remove or disconnect
desired power steering line (9 or 18).
Remove clamps (3, 5, 8, 14, or 17) from hoses (4, 10, or 15) as
required after disconnection.
1.
Remove nut (19), Iockwasher (20), and bolt (1). Remove clip (7).
2.
Loosen 2 clamps (14) and disconnect hose (15) from power steering pump (16) and power
steering gear (13). Remove hose. Remove outlet pipe (11) and seal (12) as required, Discard
seal if removed.
3.
Disconnect line (18) and line (9) at power booster (2). Loosen clamp (3) and disconnect hose
(4) from power booster.
TA49736
8-28
