TM 9-2320-289-20
8-16.
POWER STEERING GEAR REPLACEMENT (Con’t).
b.
INSTALLATION
1.
Position steering gear (10) so coupling (4) studs aline with holes in steering shaft flange (5).
Install steering gear on frame (3) with 4 spacers (2) and bolts (1). Tighten bolts to 75 Ib.-ft.
(102 N•m).
2.
Install coupling (4) on steering shaft flange (5) with new Iockwasher (6) and nut (7), and new
Iockwasher (9) and nut (8). Tighten nuts to 20 Ib.-ft. (27 N•m).
3.
Install power steering lines to power steering gear (10).
FOLLOW-ON TASKS:
• Install pitman arm. (See paragraph 8-11)
TA49740
8-34
