TM 9-2320-289-20
8-17.
STEERING SHAFT REPLACEMENT (Con’t).
b.
INSTALLATION
1.
Lubricate end of upper shaft (5) with grease. Install lower steering shaft (6) onto upper shaft with
notch in cover toward flat side of spline on upper shaft. Tap into place.
2.
Tap bolt into upper and lower steering shafts (5 and 6) and install nut.
3.
Install 2 nuts (4 and 7), washers (3 and 8), and flanged end of lower steering shaft (6) to flexible
coupling (2) at steering gear (1). Tighten nuts to 20 Ib.-ft. (27 N•m).
TA701840
8-36
Change 2
