4-29. TAILLIGHT AND LAMP REPLACEMENT (M1010 AND M1031).

FOLLOW-ON TASKS - TM-9-2320-289-20_301

4-29. TAILLIGHT AND LAMP REPLACEMENT (M1010 AND M1031) (Cont)

/.25ton/TM-9-2320-289-20 CUCV Series Trucks at Unit level Manual
Page Navigation
281

TM 9-2320-289-20 4-29. TAILLIGHT AND LAMP REPLACEMENT (M1010 AND M1031). This task covers: a. Removal b. Installation INITIAL SETUP: Equipment Condition Materials/Parts Both battery negative cables disconnected. Five Iockwashers (See paragraph 4-38) Plastic ties (as required) a. REMOVAL NOTE If removing taillight lens (9), perform step 1. If removing taillight lamps (11 or 12), perform steps 1 and 2. if removing taillight housing (8), perform steps 1-4. Remove both lamps (11 and 12) in step 2. 1. 2. Remove 4 screws (10) and taillight lens (9). Retain taillight lens gasket for installation. NOTE Tag sockets for installation. Remove stoplight lamp (12) and back-up light lamp (11) as required. TA49893 4-57

Privacy Statement
Press Release
Contact