4-31. REAR BLACKOUT LIGHT REPLACEMENT (M1010 AND M1031)

4-30. REAR BLACKOUT LIGHT REPLACEMENT (ALL EXCEPT M1010 AND M1031)

4-32. SURGICAL LAMP REPLACEMENT (M1010).

/.25ton/TM-9-2320-289-20 CUCV Series Trucks at Unit level Manual
Page Navigation
285

TM 9-2320-289-20 4-31. REAR BLACKOUT LIGHT REPLACEMENT (M1010 AND M1031). This task covers: a. Removal b. Installation INITIAL SETUP: Equipment Condition Both battery negative cables disconnected.(See paragraph 4-38) a. REMOVAL On 1984 model trucks, blackout bumper. 1. Disconnect blackout light (2) lead from wiring harness. 2. Remove nut (5) and ground (4). 3. Remove 2 nuts (1) and blackout light (2) . NOTE light (2) is installed on bracket welded to NOTE On 1984 model trucks, blackout light (2) is installed on bracket welded to bumper. 1. Install blackout light (2) on mounting bracket (3) with 2 nuts (1). 2. Install ground (4) with nut (5). 3. Connect blackout light (2) lead to wiring harness. FOLLOW-ON TASKS: Connect both battery negative cables. (See paragraph 4-38) Check operation of blackout light. TA49896 4-61

Privacy Statement
Press Release
Contact