TM 9-2320-289-20
4-27.
MARKER LIGHT AND LAMP REPLACEMENT (Con’t).
b. INSTALLATION
NOTE
If installing blackout marker light bracket (9), perform steps 1 and 2.
If installing blackout marker light (8), perform step 2.
If installing side marker light and lamp (3), perform step 3.
1.
Install mounting bracket (9) on bumper (14) with bolt (7) and nut (12).
2.
Position blackout marker light (8) on
mounting bracket (9) and connect
wiring harness (10) connector. Install
blackout marker light with 2 nuts (13).
Install wiring harness ground with nut
(11).
3.
Install lamp (3) on wiring harness
connector (6).
Install side marker
light housing (4) on fender (2) with 2
screws (5) and retaining nuts (1).
FOLLOW-ON TASKS:
Connect both battery negative cables. (See paragraph 4-38)
Check operation of marker light.
TA49890
4-54
