4-21. FLOODLIGHT AND GAS-PARTICULATE FILTER UNIT (GPFU) SWITCHES REPLACEMENT (M1010)

4-20. HAZARD WARNING CONTROL REPLACEMENT

4-22. HORN AND HORN RELAY REPLACEMENT

/.25ton/TM-9-2320-289-20 CUCV Series Trucks at Unit level Manual
Page Navigation
267

TM 9-2320-289-20 4-21. FLOODLIGHT AND GAS-PARTICULATE FILTER UNIT (GPFU) SWITCHES REPLACEMENT (M1010). This task covers: a. Removal b. Installation INITIAL SETUP: Equipment Condition Instrument cluster plate removed. (See paragraph 4-7) 1. Remove screw (3) and switch required. (7) and retainer (6) from back of instrument panel (1). Remove switch cover plate (2). Remove 1 or both floodlight switches (5) and GPFU switch (4) as 1. Install 1 or both floodlight switches (5) and GPFU switch (4) on switch cover (3) if removed. Position switch plate (2) and switch cover on instrument panel (1). Install retainer (6) on back of instrument panel and on back of switch plate with screw (7). FOLLOW-ON TASKS: Install instrument cluster plate. (See paragraph 4-7) Check operation of floodlight and gas-particulate filter unit. TA49883 4-44

Privacy Statement
Press Release
Contact